Ptp4l ethernet

GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.

If nothing happens, download GitHub Desktop and try again.

If nothing happens, download Xcode and try again. If nothing happens, download the GitHub extension for Visual Studio and try again. This notes were tested with Raspbian Stretch Literunning kernel 4. The following type of tasks are required to have a working PTP client on the Raspberry:.

ptp4l(8) - Linux man page

The following commands should be run from a terminal on the RaspberryPi target: a local or SSH connection for the Raspbian default user pi is assumed from now on. Note that SSH server is not enabled by default on Raspbian distribution. Raspberry Pi ethernet phy does not support hardware timestamping: hence software emulation must be enabled in ptp4l configuration. It can be done by patching ptp4l configuration file as follows:. Less recent kernels required patching the ethernet driver to overcome a limitation with frame timestamping.

With those kernels, ptp4l fails to start while complaining for missing support for timestamping. If you are running older kernels, please either consider upgrading or see here for instructions on patching the kernel and fix the timestamping feature. In order to build the kernel with required patches and configuration options, kernel sources must be fetched and some required build tools must be installed.

This will build the kernel in its default configuration and will take a long time. If anything fails, up to here please see the kernel building raspberrypi. This can be done as follows. Run these commands from within the linux kernel sources directory. The above commands work if you already built the default kernel before applying the pathes. Otherwise you can enable them manually with any default kernel configuration target like make menuconfig.

The new kernel image, modules and dtbs must be installed over the current ones. Backing up current files is suggested in case something goes wrong and you want to rollback. If you want to cross-compile the kernel on a faster host instead of running the process on the Raspberrypi itself, please refer to the general kernel cross-compile instruction here.

Skip to content. Dismiss Join GitHub today GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.

Sign up. Branch: master. Find file. Sign in Sign up. Go back.

ptp4l ethernet

Launching Xcode If nothing happens, download Xcode and try again. Latest commit. Latest commit bcba Nov 25, The following type of tasks are required to have a working PTP client on the Raspberry: linux kernel must be configured, built and deployed to the target additional packages must be installed and configured Preliminary operations Download Raspbian flash it on an SD card boot the OS The following commands should be run from a terminal on the RaspberryPi target: a local or SSH connection for the Raspbian default user pi is assumed from now on.

Build a new kernel with PTP support enabled In order to build the kernel with required patches and configuration options, kernel sources must be fetched and some required build tools must be installed. Build kernel with PTP enabling changes It is now possible to build the kernel with the changes we made to support PTP: make olddefconfig make -j4 zImage modules dtbs The new kernel image, modules and dtbs must be installed over the current ones.In PTP over Ethernet networks, the master sends the announce, synchronization, and delay-response packets using the multicast method.

If any unicast delay-request message is received, the master disregards the message and does not send delay-response messages to the slave.

A slave receives and processes the synchronization from the selected master clock. The slave sends delay-request messages to this master using the multicast method and processes the delay-response messages from the master to establish synchronization.

Both the link-local MAC address and the standard However, a PTP interface supports only one of the following at a point in time:. When you configure both IPv4 and Ethernet encapsulation, the unicast-negotiation configuration applies only to IPv4 encapsulation. It is not effective for PTP over Ethernet operation. When you configure a logical interface by using the stateful statement at the [edit protocols ptp] hierarchy level, each interface that you configure as a stateful or dynamic port is considered to be both a master and a slave port.

Although an ACX Series router supports up to 32 master ports and 4 slave ports, you can configure only 4 unique logical interfaces as potential PTP masters by using the stateful statement because the interface is treated as both a slave and a master interface.

You cannot configure the interface that you specify to be a stateful or dynamic port with the master or slave statements. This example shows how to configure a master port, slave port, and a dynamic port for PTP over Ethernet and PTP over IPv4 encapsulation, and how to configure unicast and multicast mode of transmission of PTP traffic among the master and slave nodes.

You can also configure unicast and multicast modes of transmission of PTP traffic among the master and slave nodes. To quickly configure this example, copy the following commands, paste them in a text file, remove any line breaks, change any details necessary to match your network configuration, and then copy and paste the commands into the CLI at the [ edit ] hierarchy level:. The following example requires you to navigate various levels in the configuration hierarchy.

In configuration mode, confirm your configuration by entering the show command. If the output does not display the intended configuration, repeat the configuration instructions in this example to correct it.

ptp4l ethernet

After you have configured the device, enter the commit command in configuration mode. Verifying the Lock Status of the Slave. Verifying PTP Statistics. In operational mode, enter the run show ptp clock command to display comprehensive, globally configured clock details. The output displays the clock details, such as the encapsulation method used for transmission of PTP traffic and the number of configured stateful or dynamic ports.

Although a dynamic port functions as either a slave or a master port, the value displayed in the Stateful Ports field denotes the dynamic ports that you explicitly configured.

List of PTP implementations

The number of dynamic ports is not computed and displayed in the fields that display the explicitly configured master and slave ports. For more information about the run show ptp clock operational command, see show ptp clock in the CLI Explorer. Verify that the slave clock is aligned to the master clock by checking the lock status of the slave. In operational mode, enter the run show ptp lock-status command to display the lock status of the slave.

The output displays information about the lock status of the slave. The output shows whether the slave is aligned to the master clock or not, and the interface name configured for PTP on the slave.

For more information about the run show ptp lock-status operational command, see show ptp lock-status in the CLI Explorer. In operational mode, enter the run show ptp slave command to display the configured slave. The output displays information about the configured slave and the status of the slave. For more information about the show ptp slave operational command, see show ptp slave in the CLI Explorer. In operational mode, enter the run show ptp master command to display the configured options for the master.

The output displays information about the configured master and the current status of the master. For more information about the run show ptp master operational command, see show ptp master in the CLI Explorer.

In operational mode, enter the run show ptp port command to display the configured ports.GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together. If nothing happens, download GitHub Desktop and try again. If nothing happens, download Xcode and try again. If nothing happens, download the GitHub extension for Visual Studio and try again.

The dual design goals are to provide a robust implementation of the standard and to use the most relevant and modern Application Programming Interfaces API offered by the Linux kernel. Supporting legacy APIs and other platforms is not a goal. The source code is managed using the git version control system.

To get your own copy of the project sources, use the following command. If the git protocol is blocked by your local area network, then you can use the alternative HTTP protocol instead. In order to run this software, you need Linux kernel version 3. Check whether your network interface supports PTP with the following command.

This command shows whether a MAC supports hardware or software time stamping. The following example output indicates support for hardware time stamping. The next example shows the case where the MAC only supports software time stamping.

Oh no! Some styles failed to load. 😵

If this is lacking, then the MAC cannot be used at all. However, adding this capability entails adding a single line of code to the device driver. If you would like to get involved in improving the software, please join the linuxptp-devel mailing list.

Skip to content. Dismiss Join GitHub today GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.

Sign up. C Roff Other. Branch: master. Find file. Sign in Sign up. Go back. Launching Xcode If nothing happens, download Xcode and try again.There are no real-time requirements for the operating system or the software stack. This application note describes how to measure 1PPS signals from different products and vendors. It also explains how the measurement results can be interpreted.

How to measure and compare 1PPS signals. System Information Report. Issues with Linux kernel version 4. This application note helps to select the appropriate basic parameter sets depending on the application and the requirements.

Using the Video add-on board. The second timestamping unit may be used by the application software to detect an arbitrary class of Ethernet packets in each direction and draw a timestamp upon transmission or reception of a packet meets the user defined filter condition. This application note briefly outlines the required actions in the user software. Timestamping of User Defined Packets.

For this both. Now, the drivers have to be installed. You may directly contact Oregano Systems for a quotation or for placing an order.

The Linux PTP Project

If required we will forward your order or request for quotation to our regional distributor. We will provide you your required updates via our secure download server SFTP server.

Back to overview. How to measure and compare 1PPS signals This application note describes how to measure 1PPS signals from different products and vendors. This could also be of interest. Contact us. E-MAIL contact oregano. Jan 30, Jan 23, Worldwide distributors.Start with E2E and switch to P2P when a peer delay request is received.

This is the default mechanism. All clocks on single PTP communication path must use the same mechanism. A warning will be printed when a peer delay request is received on port using the E2E mechanism. A warning will be printed when a delay request is received on port using the P2P mechanism. This is the default transport. All ports specified by the -i option and in the configuration file must be attached to the same PTP hardware clock PHC.

ptp4l ethernet

This is the default time stamping. No configuration file is read by default. At least one port must be specified by this option or in the configuration file. Each section starts with a line containing its name enclosed in brackets and it follows with settings.

Each setting is placed on a separate line, it contains the name of the option and the value separated by whitespace characters.

Empty lines and lines starting with are ignored. The global section indicated as [global] sets the program options, clock options and default port options. Other sections are port specific sections and they override the default port options.

The name of the section is the name of the configured port e. Ports specified in the configuration file don't need to be specified by the -i option. An empty port section can be used to replace the command line option. This value should be positive when the master-to-slave propagation time is longer and negative when the slave-to-master time is longer.

The default is 0 nanoseconds. A shorter interval makes ptp4l react faster to the changes in the master-slave hierarchy. The interval should be the same in the whole domain. It's specified as a power of two in seconds. The default is 1 2 seconds. A shorter interval may improve accuracy of the local clock. The default is 0 1 second. A shorter interval makes ptp4l react faster to the changes in the path delay.You seem to have CSS turned off. Please don't fill out this field. Please provide the ad click URL, if possible:.

Help Create Join Login. Operations Management. IT Management. Project Management. Services Business VoIP. Resources Blog Articles Deals. Menu Help Create Join Login.

ptp4l ethernet

Home Browse linuxptp Mailing Lists. Re: [Linuxptp-users] Software timestamping. Oh no! Some styles failed to load. Sign Up No, Thank you. Thanks for helping keep SourceForge clean. X You seem to have CSS turned off. Briefly describe the problem required :. Upload screenshot of ad required :.

Hello, I'm trying to use ptp4l Version 1. Unfortunately the device's network interface does not support hardware timestamping. What is the difference between options -S and -H? What hardware support is needed for option -S? Is it a driver problem? Thanks, Jan. No special HW support is needed. The receive time stamp is handled by the core networking code, but the transmit time stamp must be done in the driver.

Many, but not all drivers implement it. HTH, Richard.The definition and usage of these applications is as follows:. CPTS hardware block helps with timestamping of packets. Refer to here for details. The PPS Pulse Per Second or 1PPS signal is an electrical signal that has a width of less than one second and a sharply rising or abruptly falling edge at the second boundary. The PPS signal can be used to measure the offset and jitters of the system time between the master and slave clock.

This signal can also be used to synchronize the slave clock to its master within a BC. To enable PPS the device needs to first be booted using a different device tree file to enable the PPS pins, as listed below:. To configure this, change the device tree loaded in Uboot. If using the default Uboot environment, you can make the following changes to force the device to boot using the PPS device tree file.

Disable the automatic device tree file selection. IEP has an additional hardware to generate a programmable sync output which is tied to the IEP counter. This is called the SYNC unit. For this signal generation CMP1 is programmed to a value of 1 second. Use the following command to find out the assigned PTP ports. If the PPS output is successful, then the output is valid and can be used to measure jitter.

The PPS output latency adjustment called PPS Offset can be set through the command interface or as the port configuration parameter of linuxptp. It may serve as a source of time, i. At the heart of the ordinary clock support is the capability of being able to timestamp the PTP event messages that passes through the different Ethernet ports. Unfortunately it is usually not the case. The delay between the actual timestamp location and the ideal location at the Ethernet wire will add to the path delay and create error of the path delay and offset of the system timestamp if the egress and ingress delay is not symmetric.

The Linux PTP software stack is designed to handle those delays with environment variable egressLatency and ingressLatency.


Faele

thoughts on “Ptp4l ethernet

Leave a Reply

Your email address will not be published. Required fields are marked *

Breaking News